CIRCUITGEAR MK II (CGR-201), USB接続 ソフトウェアオシロスコープ, プローブ2本付き

型番 CIRCUITGEAR MK II (CGR-201) + Probe Kit
販売価格 41,904円(税3,104円)
購入数

CIRCUITGEAR MK II は, オシロスコープ, ウェーブフォーム・ジェネレーター, デジタルI/Oポートを1つのユニットに収めた多機能計測器です。カナダSyscomp社製

CIRCUITGEAR MK II (CGR-201) 主な機能
- USB接続
- オシロスコープ, Oscilloscope
- ファンクション・ジェネレーター, Standard Function Generator
- 任意波形発生器, Arbitrary Waveform Generator
- ネットワーク・アナライザー, Network Analyzer
- ノイズ・ジェネレーター, Noise Generator
- デジタル入力/デジタル出力, Digital Inputs and Outputs
- PWM出力, PWM Output

CIRCUITGEAR MK II (CGR-201) 主な機能仕様
- 40MS/s 2チャンネル 10ビット オシロスコープ,
 40MS/s dual channel, 10bit oscilloscope
- 10 MHz DDS 任意波形発生器(arbitrary waveform generator)
- 8チャンネルデジタルI/O, 8 channel digital I/O
- USBから給電, ACアダプターは不要です
- Windows, Linux, Mac のオープンソースソフトウェア,
 Open source software for Windows, Linux and Mac

製品仕様 - Specifications -

オシロスコープ Oscilloscope
- Maximum Sampling Rate: 40M Samples/sec
- Analog Bandwidth: 5 MHz
- Input Voltage Span: +/- 0.25Vpk to +/- 25Vpk
- Input Ranges: 7 ranges in 1:2:5 sequence2Hardware Ranges
- Vertical Calibration: Yes, software
- Input A/D Resolution: 10 bit
- Input Impedance: 1Mohm||20pF
- Timebase Span: 50ns/div to 100ms/div
- Timebase Ranges: 20 steps in 1:2:5 sequence
- Trigger: Normal, Auto, Single Shot
- Trigger Polarity: Rising and falling
- Trigger Level: On-screen, cursor selectable
- Pre-Post Trigger Display: On-screen, cursor selectable
- Readouts: Amplitude and timebase cursors
- Sample Memory: 4K points/channel
- Display refresh rate: > 5 updates/second
- Interface: USB 2.0
- Additional Displays: X-Y plot, Spectrum Analysis (FFT),
 Histogram, Waveform Math

波形発生器, Waveform Generator
- Frequency Range: 0.1 Hz to 10 MHz
- Frequency Resolution: 0.05 Hz
- Output Amplitude: +/- 3V
- Amplitude Control: Hardware
- Vertical Resolution: 8 bits
- Offset Control: Hardware
- Output Impedance: 50 ohms
- Waveforms: Sine, Square, Triangle, Ramp, Noise
- Noise Spectrum: Flat to 5MHz
- Pulse Waveform: Variable duty cycle at constant frequency
- Arbitrary Waveform: 8 bit resolution, vertical and horizontal

デジタルI/O, Digital I/O
- Output: 8 bits, 5 volt, HCMOS
- Input: 8 bits, 3/5 volt, HCMOS
- Other: PWM Output, Interrupt Input

40MHz プローブ, 40MHz Scope Probes
- X1/X10 switcheable probe
- Barrel and clip are removable
- One piece construction
- Meets IEC1010 CATI
- Includes 2 probes, accessories, and carrying pouch

ハードウェア要求, System Requirements
- Windows: Windows XP/Windows Vista/
 Windows 7 32/64/Windows 8
 Minimum 1024x768 screen resolution at 16 bit color depth
 USB Port
- Linux: Linux with kernel 2.4 or higher, X Windows
 USB Port
- Mac: Mac OS X 10.4 or higher, PowerPC or x86
 USB Port

ソフトウェアについて, Software
The oscilloscope, generator, and digital I/O are operated from a software GUI (graphic user interface) included with the hardware. The software is open-source and source code is included. The software is written in Tcl/Tk, a scripting language that is easy to learn yet powerful for creating GUIs. It runs under Windows, Linux, Unix, and Mac operating systems.CircuitGear is compatible with National Instruments LabVIEW, MATLAB, Visual Basic, and any application or programming language which can access serial ports. Syscomp provides LabVIEW example VIs that demonstrate how to control CircuitGear. Screen shots of the LabVIEW examples are shown below.
"LabVIEW examples" については, お問い合わせください。

Your recent history